400KN 16x200 mm CNC busbar bending machine for transformer substation
Specifications:
The use of 2 - axis digital control can be installed on the bus to achieve a variety of specifications, such as bending, vertical bending. The use of unique touch screen, PLC digital control mode has the advantages of simple operation, easy to use, less fault points, easy maintenance, high efficiency and low consumption, precision and accuracy, low carbon environmental protection, etc.. Only when the operation to be processed busbar installation in place, with the touch screen programming and related operations can be completed bus bar bending, vertical bending work, this machine adopts AC servo control processing side block material, grating angle advanced principle, the gauge positioning accuracy of + 0.1mm, the precision of angle control of. 0.5 degrees. The processing program starts directly single workpiece, without semi-finished single sequence stacking, can be directly transferred to improve efficiency, reduce the area and reduce the labor intensity, no residual waste, no waste discharge, safe, efficient, accurate, environmental protection. Can bus and NC punching machine combination become CNC machining center, machining efficiency ten times than conventional products
Products parameter:
| name |
unit |
parameter |
| Nominal Force |
KN |
300 |
| Bending precision |
degree |
<±0.5° |
| Maximum stroke of bending |
mm |
250 |
| Stop-stroke of material |
mm |
1400 |
| maximum speed of stop-stroke(X-axis) |
m/min |
30 |
| Bending speed |
m/min |
3 |
| minimum width of U-bending |
mm |
40 |
| Minimum forming angle |
degree |
90 |
| horizontal(width x thickness) |
mm |
200×16 |
| Vertical bending(width x thickness) |
mm |
100×12 |
| Total power |
KW |
6．5 |
| weight |
T |
1.2 |
Mould and other parts together with the machine:
Horizontal bending mould 4pcs
Vertical bending mould 1pcs
