All automatic 16x200mm punch cutting machine for distribution box
This machine has a national patent, processing principle and processing methods of new, different from the traditional concept of processing, using 2 axis digital control can be a fixture on the bus to realize all kinds of punching, cutting and embossing etc.. Patented technology to abandon the traditional product operation, complicated control (need at least 3-5 axis control of traditional products) fault and other shortcomings, using a unique digital control method has the advantages of simple operation, easy to use, few fault points, convenient maintenance, high efficiency, low precision, low carbon and environmental protection.
This machine adopts electronic pneumatic clamp, the unique repetitive positioning technology makes the feeding process not limited to the maximum length of the busbar line, Positioning accuracy ± 0.1mm.
The bending unit with 6 moulds, 4 punching, 1 cutting, 1 embossing dies, can choose the dies automatically, automatic positioning, automatic control the distance of the punching hole.
The cutting unit use punching cutting cut method, the cutting is smooth. when start the machine manual dont need intervene, Finished product automatic production, can be directly transferred, no need for semi finished single sequence stacking, waste centralized recovery, no three waste emissions, safety and environmental protection.
The machine can work together with CNC busbar bending machine, Combination of CNC busbar machining center, the processing efficiency ten times than conventional products.
products parameters:
| Name |
unit |
parameter |
| Nominal Force |
KN |
500 |
| X-axis positioning speed |
m/min |
30 |
| Maximum stroke of X-axis |
mm |
1200 |
| Maximum stroke of Y-axis |
mm |
950 |
| Stroke of Pressure cylinder |
mm |
80 |
| quantity of mould |
Punching mould |
pcs |
4 |
| Cutting mould |
pcs |
1 |
| Embossing mould |
pcs |
1 |
| quantity of control axle |
|
2 |
| accuracy of hole spacing |
mm/m |
<±0.10 |
| Maximum diameter of punching |
mm |
Φ25 |
| Maximum embossing area |
mm2 |
200×60 |
| Maximum size of the material(LXWXH) |
mm |
6000×200×16 |
| oversize(LXWXH) |
mm |
6600×3200×1500 |
| Maximum hydraulic power |
Mpa |
31.5 |
| total power |
KW |
9.5 |
| Weight |
T |
2.2 |
Main parts:
| name |
brand |
quantity |
| Motor |
yanran-china taiwan brand |
1 |
| Hydraulic pump |
yanran-china taiwan brand |
1 |
| Solenoid valve |
yanran-china taiwan brand |
1 |
| Electromagnetic relief valve |
yanran-china taiwan brand |
1 |
| Electrical components |
Schneider-german brand |
5 |
| Linear guide, ball screw |
SKF-sweden brand |
3 |
| AC contactor |
Schneider-German brand |
2 |
| Thermal relay |
Schneider-German brand |
1 |
| PLC |
Huichuan-china brand |
1 |
| Grating ruler |
Xinhe-china brand |
1 |
| Touch screen |
Pingtong-china taiwan brand |
1 |
| servo motor |
Huichuan-China brand |
2 |
| bearing |
SKF-sweden brand |
6 |
