Punching unit:
1 .thimble design-strong and stable, more accurate processing.
2 .Thrrut type punching table: we can change the mould convenient, save time and increase working efficiency.
3 .Polyurethane pad and spring:mould return material more quickly
4 .Two operation method hand operate and foot operate.
5 .Accuracy hydraulic column make the force of punching more powerful.
6 .Hydraulic cylinder make the punching stable and accuracy.
Specifications:
1 . The CNC busbar machine with bending cutting and punching 3 working position, adjust is very easy, reduce the working hour, greatly improve the working effency.
2 . Use the suitable working position you can bending cutting and punching the copper and aluminum.
3 . change different type of dies, such as punching dies and bending dies, you can complish the differnt operation.
4 . You can set the stop time, when there is no work the machine can stop automatically, this will help you save electric.
5 . The busbar machine hydraulic oil tank use 6mm steel plate welded and do phosphating, keep the hydraulic system and parts not Pollution and corrosion.
6 . every working position have measuring ruler, help you do the processing more accurate.
7 . every working unit with footer pedal and buttom switch.
8 . The machine with four wheel at the bottom, you can move the machine.
| Type |
|
303E-2 |
| Punching processing |
Maximum punching force(KN) |
300 |
| |
Punching processing scope |
Φ4.3 - Φ25 |
| |
Maximum processing thickness(mm) |
12 |
| |
Maximum processing width(mm) |
150 |
| Shearing processing |
Maximum thickness of shearing(mm) |
12 |
| |
Maximum width of shearing(mm) |
150 |
| Bending processing |
Maximum bending force(KN) |
300 |
| |
Maximum width of bending(mm) |
150 |
| |
Maximum thickness of bending(mm) |
12 |
| Vertical bending processing |
Maximum width of bending(mm) |
100(10 thickness of copper) |
| |
Minimum bending angle |
90˚ |
| Embossing function |
√ |
| Oversize(mm) |
1800 x 1400 x 1480 |
| Second workbench size(mm) |
800*420 |
| Main motor power |
3*4KW |
| Total weight |
1.4 |
Cutting unit:
1 .use of general file scissors cut:Cutting flat bed angle, no burr, beautiful appearance; no shear waste.
2 .The working table with dividing rule.
3 .Elastic polyurethane pad:Better cutting effect.
4 .Two operation method, hand operate and foot operate.
Bending unit:
1. the working table with dividing rule:keep processing more accuracy.
2 . horizontal processing: safe and convenient
3 . hydraulic cylinder: bending force more stable, more accurate bending effect
4 . steel heat treatment bending die: super hardness, durable.
5 . closed integral frame structure: bending and embossing more uniform, prolong service life.
