Specifications:
The 503 E-2 copper punching machine can processing different specifications of copper busbar and aluminum busbar, just choose the matching processing unit you can operator the machine punching cutting and bending the busbar.
Copper punching machine with high working effency is very suitable for processing high and low voltage switchgear.
the punching unit no need to change the dies. main characteristic:8 moulds and turret-type punching, the turret material is spheroidal graphite cast iron(single mould service time increase 3 times, the whole life increase 20 times) round hole dies and oblong hole dies can adjust simple.
The punching and cutting unit use vertical processing method, make the operation more simple. the cutting is smooth and no burrs.
The bending unit use horizontal processing method, just change the mould you can doing the vertical bending and horizongtal bending operation, and also can embossing, Flattening, pressing cable joint, twist, etc.
The machine with button and footer pedal two operation method, the operation is very easy, Skilled workers can easily operator the machine.
| Item |
unit |
503E-2 |
| Punching processing |
Max.punching force(KN) |
500kN |
| |
Punching scope(mm) |
4.3-34mm |
| |
Max.width |
200mm |
| |
Max.thickness |
16mm |
| Cutting processing |
Max.width |
200mm |
| |
Max.thickness |
16mm |
| Horizontal bending processing |
Max.bending force(KN) |
500kN |
| |
Max.width |
200mm |
| |
Max.thickness |
16mm |
| Vertical bending processing |
Max.bending scope(mm) |
12x120mm |
| Min.bending degree |
90 |
90 |
| Oversize |
mm |
2060 x 1660 x 1650 |
| Main power |
kw |
3x5.5KW |
| Total weight |
KG |
1850KG |
Repair tools:
1, Spare seal ring 1 set
2, Foot switch 3PCS
Operation video:
https://youtu.be/s_kwSsb2634
