manual operate hydraulic CNC busbar machine for bend cutting and punching copper
Specifications:
1 . The CNC busbar machine with bending cutting and punching 3 working position, adjust is very easy, reduce the working hour, greatly improve the working effency.
2 . Use the suitable working position you can bending cutting and punching the copper and aluminum.
3 . change different type of dies, such as punching dies and bending dies, you can complish the differnt operation.
4 . You can set the stop time, when there is no work the machine can stop automatically, this will help you save electric.
5 . The busbar machine hydraulic oil tank use 6mm steel plate welded and do phosphating, keep the hydraulic system and parts not Pollution and corrosion.
6 . every working position have measuring ruler, help you do the processing more accurate.
7 . every working unit with footer pedal and buttom switch.
8 . The machine with four wheel at the bottom, you can move the machine.
| Item |
unit |
503E-2 |
| Punching processing |
Max.punching force(KN) |
500kN |
| |
Punching scope(mm) |
4.3-34mm |
| |
Max.width |
200mm |
| |
Max.thickness |
16mm |
| Cutting processing |
Max.width |
200mm |
| |
Max.thickness |
16mm |
| Horizontal bending processing |
Max.bending force(KN) |
500kN |
| |
Max.width |
200mm |
| |
Max.thickness |
16mm |
| Vertical bending processing |
Max.bending scope(mm) |
12x120mm |
| Min.bending degree |
90 |
90 |
| Oversize |
mm |
2060 x 1660 x 1650 |
| Main power |
kw |
3x5.5KW |
| Total weight |
KG |
1850KG |
Main parts:
| name |
brand |
quantity |
| Motor |
Lijia |
3 |
| Hydraulic pump |
HYDROMAX |
3 |
| Solenoid valve |
HYDROMAX |
3 |
| Electromagnetic relief valve |
HYDROMAX |
3 |
| AC contactor |
Schneider |
3 |
| Thermal relay |
Schneider |
3 |
Repair tools:
1, Spare seal ring 1 set
2, Foot switch 3PCS
Operation video:
https://youtu.be/s_kwSsb2634
