portable 12x200 mm busbar copper punching machine for household and outdoors
Main characteristic:
The portable punching machine mainly processing iron, steel, copper, aluminum, the maxiumu punching thickness is:10mm, the punching diameter between 6mm and 20mm.Its is very suitable for outdoors and household, CH-60 usually use together with CWC-150 cutting machine and CB-150D bending machine.
The punching machine have hand operator and footer pedal two operation method, when you punching material just step on the footer pedal the machine will running, once stop step the footer pedal the machine will stop, it is very easy to operator.
CH-60 use 750W electric pump, the pump is 100% original, compare with others our machine with long service time, becuase the pump is good enough, the solenoid valve of the pump is high quality.
Before use the machine please add NO.20-NO32 hydraulic oil first.
Specifications:
CH-70 seprate-type hydraulic punching machine, used in angle iron, flat iron, Channel steel, I-steel, copper aluminum plate punching hole, specilized in electric power, construction, heavy work, ship, bridge and other industries, suitable for operation in outdoors.
1. The body of the machine is made of forged steel wire cutting with raw material. It is beautiful and durable and strong hard to broken.The bottom is designed with flat seat.
2. The punching speed is fast and the positioning is accurate. No noise, no broken chip, safe operation of cleaning, no burr, no deformation, conforms to the national standard of similar products in the second to none.
3. CH-60 is suitable for outdoors operation or fixed in the factory for mass production.
4. The pump use double hole oil road, oil return more quickly, can prepare the solenoid valve foot switch, convenient, quick, practical.
5. The weight is light. The die is made of Cr12 through heat treatment. It is resistant to stamping and long life. It can customize the mould of different specifications according to the design requirements.
| Function |
punching |
| type |
CH-70 |
| Maximum pressure of punching |
35 tons |
| Maximum thickness of punching |
copper, aluminum:12mm, steel plate:10mm |
| Mould parameter |
Diamerer 6-20mm |
| Weight |
30KG |
| Oversize(cm) |
33*20*39 |
| Name |
Electric pump |
| Maximum pressure |
70Mpa |
| minimum |
7 Mpa |
| power |
750W |
| rate |
50Hz/60HZ |
| Oil storage |
7L |
| High-Pressure flow |
0.9L/min |
| Low-Pressure flow |
5.0L/min |
| voltage |
220V |
| speed |
1400r/min |
| Oil type |
Antiwear hydraulic oil |
| Oversize(cm) |
50*60*40 |
| weight |
30KG |
| Total weight |
60KG |
If need extra type of punching dies please tell.
The machine use for punching copper aluminum busbars need electric pump work together.
CH-70 weight is light can punching different holes according the requirements.
The punching no is smooth no burrs no deformation, its comply with national standards, better quality than other factory.
About the hydraulic system warranty time is 1 year, quick-wear not included.
