Any debris machine with a long time will produce a lot of dust and products, if not timely cleaning, it may lead to the normal operation of the machine, so the bus processing machine, in addition to do maintenance work, cleaning work is the key.
First, the hot oil cleaning method because of the use of a long time, soft dry oil or rust proof hardened bearings, should be immersed in 100 - 200 degrees Celsius in the heat of the engine oil, using pliers to clamp the bearings, with a brush to clean the oil on the bearings. Soft dry oil or rust inhibitor is heated to 100 - 200 degrees C melt, it is easy to wash out from the cracks in the bearing. Sometimes as long as the bearings in the oil repeatedly shaking. Oil will flow through the gap. In the spherical bearing cleaning the old bus processing machine imported motor or motor, should take the ball, bead frame, the inner ring in the horizontal transfer from the hot oil and then immersed in a cylindrical roller bearing cleaning should also roller, bead frame, the inner ring and the outer ring off. When the oil is clean, the temperature of the oil should not exceed 20. If using direct fire heating, should pay attention to avoid the burning of oil, bearing should be hung in the pan, the bottom will lead to overheating and decreased hardness.
Two, like cleaning the bearing soak in oil in 5 - 10 minutes, hand pinch the inner ring, the other hand change the outer ring, bearing on the anti rust oil or cream will fall off. Then the bus processing machine bearing into cleaner oil, rinse with meticulous soft brush, put the ball in the gap and then put the oil washed clean 1 times in gasoline, after taking out on clean paper. Spherical ball bearings and cylindrical roller bearings shall be removed from the ball, bead frame, inner ring and outer ring. Bearing installed in the shaft on the bus processing clean, mainly by leaching oil or oil gun eruption to clean off the oil simple first with kerosene after gasoline; oil is difficult to clean out, first with 100 - 200 DEG C engine oil or oil leaching eruption, then clean gasoline. Must pay attention not to use sharp things: hard scraping bearing grease or rust, avoid damage to the bearing rolling body and groove ring parts of the smooth, clean cloth to wipe clean the bearings with.
Therefore, Ji'nan business aviation CNC Equipment Co., Ltd. to remind you that after the use of bus processing machine, we must always do a good job cleaning his Oh ~
Contact Person: Mr. Zhu